jueves, 31 de enero de 2013

Get MEP and IMEI codes, and release the Blackberry.

(Note: This tutorial works perfectly with all Blackberry models. The only thing that differs is the way to enter the unlock code)

These two codes are necessary to obtain the code that will allow us to free up our phone, the MEP2. Both 2 codes (MEP and IMEI) can be obtained with a little program that will put more down this same input (but let me explain what I tangled and are each):

MEP-code is a code that brings Blackberry series, which prints it's own phone manufacturer. There may be hundreds of BlackBerrys with the same MEP, like dozens of other MEPs.
-The IMEI code is a code that identifies the phone prerecorded worldwide once we connect to a network. What would be a computer IP address.

For two separate codes, download reader.exe MEP, which attached the link below (uploaded by myself): http://www.mediafire.com/?hx27ze3ea4kaioc

Once downloaded, remove the memory card and the SIM to the Blackberry, and disable the mass storage memory card in memory options. After that, simply connect the BlackBerry to the computer, and give Read Phone'''', in the above program. This will put the two codes.
Note: it is likely that neither the first nor the second I read the phone. Try plugging the blackberry and give the button, or give the button and then connect. After a couple of tries ...Voila! We have what you need.

Now with these two codes, they only have to send them to me as it is described on the button below: first put the MEP code (including scripted), put'' /'', followed by IMEI another'' /'' and then put your email address. And I will send for only 6'99 the MEP2 code, with which your Blackberry will be released (below describe how to enter this code).



IMEI / MEP / e-mail


Once payment is received, I will proceed to send the unlock code. Schedules will be sending these from 12:00 to 00:00. Upon receiving my email with the code, just enter the code left them in your terminal. Here is the instructions for the model:

-Blackberry 8520, 9360, 9370, 9380, 9780, 9790, 9800, 9810, 9850, 9860, 9900, 9930:
 1. Turn off all wireless connections.
2. Go to Options.
3. Go to Device.
4. Go to Advanced System Settings.
5. Go to SIM Card.
6. Now type MEP2
7. Now the phone requests the "Code Red" or "Mep Code" and shall enter the code we have provided and give OK.
8. Restart your BlackBerry and check all connections Wireless (network, bluetooth ...)

-Blackberry Bold 9000:1. No SIM card in your BlackBerry Bold
2. Disconnect all wireless connections.
3. Go to options (settings), for this purpose press the button with the Blackberry
4. Select Advanced Options (advanced options).
5. Select the SIM card (SIM CARD)
6. Hold down "ALT" and type MEPE (MEPE writing letters will not on screen).
7. Now you will see a message similar to "enter MEP code", "escribirEscribir Network MEP code" or "Enter Network MEP code" and enter the code should we put we have provided and the enter key or the center ball.
8. Restart your BlackBerry and check all connections Wireless (network, bluetooth ...)
9. Your BlackBerry Bold is now free

-BlackBerry 8100, 8110 and 8120:
1. It can be done with or without a SIM card.
2. Go to the options menu => Advanced Options.
3. Go to the menu of SIM card (if no SIM card message appears above the screen indicating)
4. Directly type in MEPD (to write the letter "P" must press the "OP" twice). Nothing will show on screen while typing.
5. Then type MEP2 (to write the letter "P" must press the "OP" twice, and write the number 2 must press and let down ALT while typing 2). Nothing will show on screen while typing. The ALT key is the one with two arrows, one up and one down.
6. The message "Enter PIN MEP"
7. Introducaza unlock code provided and press enter (key to the right and down with an arrow to the left).
8. Is displayed on the screen 'Code Accepted', which means that your BlackBerry Pearl is released.

-Blackberry 6230 7230 7290 and 8700:
1. Light the Blackberry without SIM card.
2. Press menu and go to the settings menu - Advanced Options-SIM Card.
3. While pressing the SHIFT key type MEPD.
4. Now you will see 5 categories.
5. While holding the ALT key type MEP2.
6. Release the ALT key.
Now ask for the MEP code.
Enter the unlock code provided
Press OK and the BlackBerry will be completely unlocked, ready to be used with any operator.

-BlackBerry Curve, 8300, 8800, 8900 (second choice):
1. Turn your Blackberry SIM card set
2. Enter the options menu
3. Enter the Advanced menu
4. Go into the SIM Card menu
5. Holding down the ALT key type MEPE sequence (nothing will show on screen while typing)
6. We will get a window saying "Enter Network MEP Code"
7. Put the unlock code we provided and click OK (or enter)
8. Now our Blackberry will be free

(I am not responsible for any damage caused by misuse that may give the release code, or that this is incorrect. Claims, contact via e-mail liberablackb@gmail.com)

Enjoy your terminal released. Best regards,